1240-12V DC 12V 1.7A 20.6W 1kg Holding Solenoid for Electric Door Lock

Want to lock a door, drawer or any other moving part and control it electronically? then this solenoid lock is perfect for you. You can interface this electromagnetic lock to any Micro-controller, Arduino or even raspberry pi using a simple relay if you want you can directly use aone channel relay driver module. Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the centre of the coil. This makes the solenoid able to pull from one end. This 1240 12V DC 12V 1.7A 20.6W 1kg Holding Solenoid for Electric Door Lock can be used for locking sell-machine, storage shelf, file cabinet and etc. The hidden way of unlocking can be used for an emergency. The lock works as the circuits disconnects, and it will unlock as the instant power-on. It is steady, durable and energy-saving and had a long lifespan. In the anti-theft and shockproof design, the lock is better than other kinds of locks. After connecting the wires and when the current is available, the electric lock can control the doors opening and closing. This solenoid, in particular, is nice and strong and has a slug with a slanted cut and a good mounting bracket. Its basically an electronic lock, designed for a basic cabinet or safe or door. Normally the lock is active so you cant open the door because the solenoid slug is in the way. It does not use any power in this state. When 9-12 Volt DC is applied, the slug pulls in so it doesn’t stick out anymore and the door can be opened Applications: Applied to the cabinet lock, locker locks, file cabinet locks, luggage locks, electric locks, door locks, solenoid locks, drawer, newspaper boxes lock, sauna lock, locker electromagnetic locks, electric locks, newspaper boxes, sauna Electronics lock